PLEASE BE CAREFUL HOW YOU PLACE CAMERA AND OTHER ITEMS IN THE CASE TO AVOID PRESSURE ON MONITOR
Recorder (Does not apply to TVIHD-2 Kit)
A Booklet will be issued
1. Do not take SD card out when DVR is working
2. Use original power cable and AV cables
3. Format SD card by DVR system on your first use if required
4. Store the unit in dry and ventilatory environment
5. Use genuine SD card
6. Warranty and free maintenance will be invalidated if you disassemble the unit
Because the system is running through the recorder, the monitor is best left with factory settings, so no need to touch monitor sensor buttons unless you are changing monitor settings ie Brightness, Colour, etc.
Apply power to recorder.
The system is already preset. Power is supplied directly to the recorder with the 12v DC provided. The recorder will automatically start initiating then record every time you apply power. Remember to delete unwanted files using remote as this will use storage.
You can delete files whilst on record, Press “Stop” then” Esc” to see files, select “DEL” Yes/No, yes to delete, or to play select "ok" "Play" use arrows left or right to Forward/Rewind.
You can change to manual by going to “Menu” using the remote, select “REC. Mode” then select Manual.
Enter into system: Press “Menu” on remote to see the list of options ie time, date, etc.
Choose items to select by using the direction keys.
Confirm your choice: press “OK” "Exit".
12v Dc Power supply
Led Brightness Control
Recorder Manufacturers Instructions